Liquid Section - Liquid Filling
Machinery
|
LIQUID :
Colloid Mill
|
|
“GEBERIX” COLLOID MILL is suitable for
homogenizing emulsifying dispersing, mixing, comminuting of liquids to highly viscous products. It is based on rotor – stator principle, It is available in plain as well as water jacketed in both STD & GMP models.
OPERATIONS:
Product is feed to the operating ares of a rotor, having a speed of 3000 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor , the angular gap becomes narrower towards the discharges section. This processed product
continuously leaves the mill through the drain pipe, if required, it can be
re circulated. |
SALIENT FEATURES :
- All contact parts are made out of S.S. 304 (S.S. 316 on demand at extra cost). No castings are used to avoid contamination problems.
- Coupling provided between motor shaft and rotor shaft for ease in
maintenance.
- Three leak proof neoprene sealing device between the motor and the processing chamber to prevent liquid going in the motor winding.
- Modified design of semi concave teeth in rotor and stator reduces motor h.p. and gives better performance in size reduction without damaging the products.
- Extended bearing housing specially designed to facilitate fine metal contact of rotor and stator. This unique design provides smooth and consistence all around performance and long life of rotor and stator.
- Three way cock system for draining and recirculation of the liquids provided as standard. Extra discharge sprout provided as a standard for viscous products.
- DOL starter with overload relay for protection against single phasing and low voltage.
- Contact parts can be easily dismantled for cleaning.
- Special design facilitates adjustments of the grinding gap by exterior screw by means of handle even during operation.
- Flame proof motor and Flame Proof rotary switch can be provided on request at extra cost.
|
|
TECHNICAL SPECIFICATIONS:
| MODEL |
BECM3 (FOR 3 H.P MOTOR )
BECM5 (FOR 5 H.P. MOTOR) |
| OUTPUT |
120 TO 12,000 KGS/SHIFT |
PARTICLE SIZE
REDUCTION |
5 TO 10 MICRONS |
| HOPPER CAPACITY |
15 LTRS. |
| MOTOR |
3 H.P. 2820 R.P.M. 440 V. 50 CS/ 3 PH
(FOR 3 H.P MODELS)
5 H.P. 2820 R.P.M. 440 V, 50 CS, 3 PH
( FOR 5 H.P. MODELS)
|
| HEIGHT |
1200 MM |
| FLOOR SPACE |
410 X 680 MM |
| NET WT |
130 KGS |
| GROSS WT |
220 KGS |
| CASE DIMENSIONS |
550 X 830 X 1300 H |
|
|
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
|
LIQUID : Vessels & Tanks
|
|
Vessels and tanks are manufactured as per clients requirements and space available for installations. Tanks and vessels are available in various designs and options such as
- Plain storage tanks with loose top lid & either flat of dished bottom
- Manufacturing vessels with agitators
- Reactors
- Vessels under vacuum / without vacuums.
- Jacketed vessels and tanks.
- Vessels and tanks with limped coils etc
- Horizantal, capsule shaped, etc tanks available.
Vessels and tanks are available from 50 ltrs to 100000 ltrs in any shape and size as per clients requirements. |
|
|
LIQUID : Pumps
|
SALIENT FEATURES:
|
|
Centrifugal monoblock pumps & lobe pumps in sanitary design are available in various sizes and capacities. Pumps can be used for transfer of liquids, semi solids etc. All pumps are in S.S. 316 contact parts and are available from 0.5 HP to 20 Hp capacities. Inlet & Outlet can be given in Triclover or Din fittings as per clients requirements. |
|
|
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
|
LIQUID :
Bottle Washing Machine
|
|
|
TECHNICAL SPECIFICATIONS
| Wash Cycle |
First Wash : 4000Ltrs/Hour Approx at 15PSI.(Detergeant Water).
Second Wash : Minimum Consumption as such, water loss during
recirculation shalL be compensated. (Steem/Hot
Water).
Third Wash : 700 Ltrs/Hour Approx at 15 PSI. (D.M. or DL. Water).
Fourth Wash : 15 PSI (Air)
Outside wash : 1200 Ltrs/Hour Approx at 15 PSI (Ordinary Water). |
| Electrical Motor |
0.5 HP/440 Volts/3 Phase/50Hz (four wire) For Main Machine.
1 HP/440 Volts/3 Phase/50Hz (Four wire) For Water Pump. |
| Ele. Heater |
3 KW. (Four Hot Water) |
| Container Size |
28 mm to 85 mm, Maximum Height 280 mm |
Container's
Neck Size |
20 mm to 38 mm, Maximum Height 280 mm (With the help of required change parts) |
| Overall Dimension |
1550 mm(L) X 1700 mm (W) X 1350 (H) Approx |
| SALIENT FEATURES |
|
| Geneva Mechanism |
Out side wash system |
S.S. Elegantly
Matt Finish Body |
70 Ltrs. capacity water tank (Two Nos.) |
|
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
|
LIQUID : Bottle Sealing Machine
|
|
|
TECHNICAL SPECIFICATIONS
| Output/Hour |
2400 to 4600 Containers (Depending on bottle size) |
| Electrical Motor |
1 HP/440 Volts/3 Phase/50 Hz (four wire) For Main Machine |
| Conveyor Hieght |
750 mm to 840 mm Adjustable |
| Container Size |
22 mm to 75 mm, Maximum Height 210 mm |
| Cap Size |
22 mm to 38 mm (With the help of required change parts) |
| Overall Dimension |
1820 mm(L) X 750 (W) Approx. |
Models available in 4 head, 6 head, 12 head, 16 head models. |
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
|
|
 |
|
|
|
